Service area / London
Steel framing supplier in London.
Cold-formed steel studs, tracks, trims and drywall accessories, cut to your lengths and delivered to your London jobsite in 1 to 3 business days, in any quantity, at competitive prices.
MANUFACTURER
Sharp pricing on every skid
ORDER SIZE
From a $1,000 order to a full truck
CUT TO LENGTH
Ordered, not stocked
DELIVERY
Business days, boom truck to your lot
Supplying London builders from our Toronto plant
Made in Toronto. Built for London.
London builds differently than the GTA. Hospital, university and college work drives steady demand for non-combustible partition framing, while growth in Hyde Park, Lambeth and along the downtown and rapid transit corridors keeps mid-rise and infill moving year-round.
Your order is handled by the team that rolls it. The gauge, length and profile you specify are what gets rolled, and the person who confirms your order is the person who can answer a technical question about it.
We ship scheduled loads to London and across Southwestern Ontario from our facility on Millwick Drive, about two hours down the 401.
Products we stock for London projects
What we roll.
Four product families cover most London partition, institutional and mid-rise work. Anything outside them, send the section detail.
Interior and structural studs and track, slotted and flex track, shaftwall CH stud and J-track, windbrace and L-track.
Furring, resilient and carrying channel, Z-bar, corner beads and trims, hanger and tie wire, clips, lath and mesh.
Cold-formed floor joists and rim track (LSF floor system), roof deck, composite floor deck, form deck, acoustic deck.
Special profiles bent from galvanized steel to your shop drawing.
Delivery and lead times to London
200 km, same day.
Our plant sits roughly 200 km from downtown London, about a 2 hour run via Highway 401.
London service
Current timing
Standard stock order
Custom gauge or length
Order size
Minimum order
Delivered
Jobsite delivery
Direct to sites across downtown, Old East Village, Hyde Park, Masonville, Byron, Lambeth and White Oaks. Tell us the access conditions when you order. Tight downtown sites, restricted windows and boom requirements get scheduled in advance rather than discovered on the day.
Pickup
Will-call pickup
If your crew or hauler is coming through the GTA, orders can be picked up at 40 Millwick Drive, Unit 4, Toronto. Pickup orders are staged and ready on confirmation, so your driver is not waiting on the yard.
Pricing in London
Why London buys from Saturn.
Competitive pricing on every order, rolled, cut and shipped from one plant without extra handling along the way.
Competitive pricing
Sharp pricing on every skid, quoted by the people who roll the steel.
A scheduled London run
Your order rides a planned route, not a one-off freight booking arranged after the fact.
Boom truck placement
Material set where the crew needs it, which matters on tight Centretown and infill sites.
Cut to length, not on site
Studs and tracks arrive at the dimension on your schedule, so crews install instead of cut.
Talk to the plant
Gauge and spacing questions answered by the people rolling the steel, before you order.
All orders feature CSSBI certification, strict quality inspections, and guaranteed written lead times for reliable scheduling.
Custom gauges and cut-to-length orders
Cut to your lengths.
Custom fabrication is not a special request here. It is how we run.
We produce studs, tracks, furring bars and trims in custom lengths, gauges and profiles to match your drawings.
At two hours from the plant, London projects can order by phase instead of all at once. Each delivery arrives cut to the lengths that phase needs, so your crew is not cutting on site and you are not paying to haul away offcuts from stock lengths bought to cover the whole job.
Lengths: Cut to the exact dimension on your schedule.
Gauges: 25 through 20, plus custom thickness on request.
Widths and legs: Web and flange sized to the assembly.
Profiles: Custom shapes rolled from your section detail.
Code compliance and certification
Certified to spec.
London projects answer to the Ontario Building Code and, on hospital, university and other institutional work, to additional specification requirements.
CSSBI product certified: Manufactured to recognised cold-formed steel standards.
Well Made Here member: Canadian manufacturing, verified.
Consistent gauge and coating: with documented quality inspection on every run.
Specification sheets: available for submittal packages.
Engineering and shop drawing support in London
Checked before it ships.
In-house structure consultation, load calculations and product selection, from planning through installation.
Selection
Gauge and spacing
Confirmed against partition heights and deflection criteria before the order is placed, not after the walls are up.
Detailing
Head-of-wall
Deflection detailing for non-combustible assemblies common in institutional and multi-residential builds.
Permits
Submittal support
Documentation for City of London permit packages and institutional specification reviews.
Schedule
Substitution review
When the specified product is unavailable and the schedule cannot wait, we help find a compliant equivalent.
Who we supply in London
Who buys from us.
Four groups, four different reasons for ordering from Saturn.
Framing and drywall contractors who need consistent gauge and straight material on a schedule they can build around.
General contractors and developers running mid-rise residential, institutional and commercial builds.
Distributors and lumber yards in London and Southwestern Ontario carrying steel framing lines.
Architects and spec writers who need product data before the spec is locked.
How ordering works
Spec to site.
Send your list, we confirm the spec, and we manufacture, cut and deliver.
Send the list
Takeoff, drawing or a simple list of profiles.
Confirm the spec
We check widths, gauges, lengths and custom needs.
Manufacture and cut
Produced and cut to length at our Toronto facility.
Deliver to site
Scheduled delivery with boom truck placement.
London steel framing FAQ
Common questions.
Lead times, minimums, gauges and permits, answered for London specifically.
Yes. We ship from our Toronto plant to jobsites across London, including downtown, Hyde Park, Masonville, Byron, Lambeth and White Oaks, as well as the surrounding Middlesex, Elgin and Oxford counties.
Standard stock orders are delivered to your London site within 1 to 3 business days, and custom gauge or length orders ship within 5 to 8 business days. Your quote confirms the delivery date.
Our minimum order value is $1,000 CAD. Above that, we deliver any quantity to your London site, from a few bundles to a full truck. Orders can also be picked up at our Toronto facility at 40 Millwick Drive.
We produce studs from 25 gauge for lightweight interior partitions through 20 gauge for structural applications, in a range of web widths and flange sizes. Custom gauges are available on request.
Yes. Custom fabrication and precision cutting to your exact specifications is a standard service. On phased projects it is usually worth doing, since each delivery arrives ready to install and offcut waste stays low.
Our products are CSSBI product certified and manufactured to recognised cold-formed steel standards. Product documentation is available for permit submittals and specification review.
In most cases yes. New construction, structural alterations and most commercial interior build-outs require a permit from the City of London before framing begins. We supply the product documentation your submittal package needs, but the permit itself is handled by your GC or owner.
Yes. We supply building material distributors and yards across Ontario, including London and Southwestern Ontario. Contact us for distributor pricing and program terms.
Areas we serve near London
Southwestern Ontario.
Scheduled routes reach Middlesex, Elgin and Oxford counties along the 401 and 402 corridors.
Related resources
Keep reading.
Move from regional context into the product specs, the process, and the first project conversation.
Products and catalogue
Full range, gauges and profiles
Custom fabrication
Cut-to-length and custom rolling
Engineering support
Load calculations and submittals
Certifications and standards
CSSBI, OBC, documentation
Southwestern Ontario markets
St. Thomas, Woodstock, Stratford
Request a quote
Pricing and delivery dates
Ready?
Send the list. We will take it from there.
Have a drawing, BOM, specification or product list? Add it to your request so we can start with the right context.