1
Chat on WhatsApp

Products / Steel Framing Systems

Every profile.
One plant.

Browse Saturn Metal steel framing families by system, application and profile type. Saturn Metal is the new brand name for Saturn Maple Inc., manufacturing the same profiles at the same Toronto facility.

Every Saturn Metal steel framing family, made at our Toronto plant. Formerly Saturn Maple Inc.

28 products

Cold-formed 25 gauge steel C-studs for interior walls that carry no axial load. The studs stand in matching floor and...
Cold-formed steel C-studs from 20 to 12 gauge for walls that carry floor and roof loads, wind load, or both....
Cold-formed steel joists for light steel framed (LSF) floors, mezzanines and roofs. A cold-formed joist floor is light, dry and...
U-shaped track that holds steel studs at the top and bottom of walls, frames headers and sills at openings, caps...
Head-of-wall track fixed to the structure above. Its 2-1/2" legs have vertical slots and the studs are screwed through the...
Bendable track for curved framing. Short U-shaped segments, linked by folded pleats in the legs and a tab in the...
The vertical member of a fire-rated, non-load-bearing shaftwall built from one side only. Each stud has a 1" slot on...
The runner, jamb strut and end closure of a one-side-built shaftwall. The long leg faces the shaft and backs up...
One cold-formed steel U channel with three jobs: the main runner of a suspended ceiling, hung on wire; bridging that...
A light, hat-shaped galvanized steel channel. Its feet fasten to a masonry or concrete wall, to joists or the structure,...
A plain 90° galvanized steel angle for interior framing. The 1" × 2" L-track frames bulkheads, columns and soffits with...
Single-leg RC1 channel screwed across steel or wood studs and joists, with the gypsum board screwed to the channel instead...
A light galvanized steel brace with a T-shaped section, run diagonally across a framed wall. Its web sits in a...
Straight galvanized steel wire that hangs a suspended ceiling from the building structure. Each wire is tied to the slab,...
Thin, soft annealed 18 ga galvanized steel wire, cut to 27" and 42" lengths. It ties furring channel to carrying...
Galvanneal steel corner bead for every 90° outside corner of a drywall wall, column, bulkhead or opening. Its rounded nose...
Galvanneal steel corner bead for wide-angle outside corners. It is formed at 130° to fit the 135° corners of bay...
Galvanized steel L trim that gives a clean, finished edge where gypsum board ends: at door and window openings without...
Galvanized steel J trim that caps the end of a gypsum board with a clean, finished line at window and...
Galvanized clips that join cold-formed steel framing to itself and to the building: studs to slabs, joists to rims, walls...
Galvanized diamond mesh: a light steel sheet opened into many small diamonds. Fastened to framing, it is the base for...
Flattened expanded steel mesh screwed to the studs behind the gypsum board. It adds a continuous steel layer inside the...
Flat galvanized steel in the width and thickness the job needs: horizontal strap bracing on wall studs, strap bridging under...
Galvanized steel Z-shaped furring with a back flange, a web and a front flange. Fastened to a concrete or masonry...
Galvanized steel deck that spans between open-web joists, purlins or beams and carries the insulation, membrane, snow and wind of...
Roof deck with perforated webs and a glass-fibre acoustic batt in every rib. Sound from the room passes through the...
Galvanneal steel deck with embossed webs. During the pour it is the form, carrying the wet concrete and the crew...
Shallow corrugated galvanized sheet that stays in place as a permanent form under a concrete slab or topping. It carries...

Need a specific profile?

Send the requirement.

Share product family, dimensions, gauge, length, quantity, project location and any drawing, BOM or specification available.