Certifications & Compliance
Specifiers and contractors need to verify a supplier before they approve one. This page sets out what Saturn Metal is certified for, what it is a member of, and which standards apply to each product family.
Memberships & Product Certification
A membership and a product certification are not the same thing, and treating them as one is a common way suppliers overstate themselves. Each credential below is labelled by what it actually is.
Industry Membership
The Interior Systems Contractors Association represents the drywall and interior systems contractors in Ontario who install our products every day. Membership keeps us close to the trade that uses what we make, and signals industry participation rather than product approval.
Industry Membership
The Canadian Sheet Steel Building Institute develops the standards, technical documents and design guidance used across Canadian sheet steel construction, including CSSBI 61:24. Membership keeps our manufacturing aligned with current industry practice.
Product Certification Reference
Certified through the CISC / ICCA program against CSSBI 61:24, the Canadian standard for light gauge steel framing members. This is the only credential on this page that speaks to the product itself.
Canadian-Made Program
Well Made Here / Bien fait ici is a Canadian program that identifies products made in Canada. A product line qualifies when at least 51% of its manufacturing costs are incurred in Canada. It marks where a product is made; it is not a performance certification.
Product Certification
CSSBI 61:24 sets the requirements for steel grade, coating, dimensions and tolerances on cold-formed steel framing members. Certification through the CISC / ICCA program means an outside body verifies that production meets those requirements, rather than the manufacturer asserting it.
CSSBI 61:24 Certificate
Certified by
CISC / ICCA Product Certification Program, audited by an accredited third party
Standard
CSSBI 61:24, cold-formed steel framing members
Certificate no.
CFM6388604SMI
Plant
Saturn Maple Inc., 40 Millwick Dr, Unit 4, Toronto, ON M9L 1Y3 · plant code SMI
Scope
Cold-formed framing members, as named in the Product Scope Listing issued with the certificate
How to specify Saturn Metal
“Cold-formed steel studs and track: Saturn Metal (Saturn Maple Inc.), certified to CSSBI 61:24 under the CISC / ICCA Product Certification Program, or approved equal.”
Not covered by this certificate: deck, corner bead and trims, lath and wire. They are made to their own ASTM and CSSBI standards, listed in the standards table below.
CISC Member Certificate
Issued by
Canadian Institute of Steel Construction (CISC / ICCA)
Recognition
CISC Member, Canada’s national steel construction association
Valid
May 2026 to April 2027
Member
Saturn Maple Inc., 40 Millwick Dr, Unit 4, Toronto, ON M9L 1Y3
Scope
Industry membership only. Not a quality management system or product certification. Current members are listed at cisc-icca.ca
Product Standards Reference
Different product families sit under different standards and documents. This table shows what applies to each, so your team knows what to ask for at submittal stage.
Product family
Evidence required
CSSBI 61:24, ASTM C645 non-structural members, ASTM A653 galvanized coating
CSSBI 61:24, CSA S136 cold-formed steel design, ASTM C955 structural members
CSSBI 61:24, ASTM C645 and C754 for channels, ASTM A641 for wire
CSSBI 61:24, CSA S136 cold-formed steel design, AISI S240
CSSBI 61:24, ASTM C645, AISI S220, CAN/ULC-S101 rated assembly
ASTM C1047 accessories for gypsum board, ASTM A653 galvanized coating
CSA S136, ASTM A653 / A1003, CSA A370 for masonry ties
ASTM C847 metal lath, ASTM C1063 installation, ASTM A653 galvanized coating
Manufactured to the approved shop drawing, ASTM A653 galvanized coating
CSSBI 10M roof deck, CSSBI 12M composite and form deck, CSA S136
Compliance Questions
The certificate covers cold-formed framing members made at our plant at 40 Millwick Dr, Unit 4, Toronto, as named in the Product Scope Listing issued with certificate CFM6388604SMI. Ask us for the Product Scope Listing to confirm a specific product.
Fire ratings apply to tested wall assemblies, not to individual studs or tracks. Ask for the tested assembly reference that matches your wall design.
The CSSBI 61:24 certificate and the CISC membership certificate are shown on this page. For a submittal package, contact our team and we will send the certificate together with its Product Scope Listing.
Yes. Saturn Maple Inc. remains the registered legal entity and manufactures under the Saturn Metal brand. Certificates and memberships are held in the Saturn Maple Inc. name.
Technical support
Tell us the project and product family, and our team will send the certificate, standard reference or data sheet that applies.