Technical Resources & Documents
Sizes, gauges, lengths and documents for every Saturn Metal profile, in one place. Use it to select a product, write a specification, or put a submittal package together.
Document Search
Type a product name or data sheet number. Matching documents appear as you type, each with a direct link to the PDF.
Can’t find a file? Tell us the product and document type you need, and our team sends the current version.
Product & Technical Catalogue · PDF
Every profile in one file: studs and tracks from 1-5/8" to 14" in 18 to 97 mils, cold-formed joists, deflection track, shaftwall, channels, clips, trims, lath, mesh, wire and steel deck.
No document matches that search. Try a product name such as stud, track or channel, or request the file from our team.
Product Data Sheets
Each card lists the sizes Saturn Metal manufactures for that family. Use these figures for selection, then open the product page for full dimensional detail.
Product Data / Studs
Light gauge: 1-5/8″, 2-1/2″, 3-5/8″ and 6″ webs, 1-1/4″ flange, 25 gauge, in 8, 9, 10 and 12 foot lengths. Heavy gauge: 1-5/8″ through 14″ webs, 1-1/4″ to 3″ flanges, 20 to 12 gauge, cut to any length.
Product Data / Tracks
Standard track: 1-5/8″ to 14″, 1-1/4″ leg, 25 to 12 gauge. Slotted deflection track: 2-1/2″ to 14″, 2-1/4″ leg. Deep leg track: 2″ to 3″ legs, 25 to 14 gauge. U-Flex track for curved walls: 2-1/2″, 3-5/8″ and 6″, 25 and 20 gauge. All in 10 foot lengths, U-Flex in 8 foot.
Product Data / Channels
Furring channel: 7/8″ leg, 25, 20 and 18 gauge. Resilient channel: 25 gauge, 12 foot. Bridging and carrying channel: 3/4″ and 1-1/2″, 1/2″ leg, 18 and 16 gauge, 10 and 12 foot.
Product Data / System
CH studs in 2-1/2″, 4″ and 6″, 25 and 20 gauge, 8 to 14 foot or custom. Matching J-track in the same widths with 2-1/4″ and 3″ legs.
Product Data / Finishing
90° and 130° corner bead, 1-1/4″ x 1-1/4″, in 8 to 12 foot. J-trim in 3/8″, 1/2″ and 5/8″. L-trim in 1/2″ and 5/8″, 8 and 10 foot.
Product Data / Accessories
L-track angles from 1″ x 1-1/4″ to 2″ x 2″, flat strips, Z-bar from 1″ to 6″ and custom widths, windbrace, bridging clips, webslide clips, deflection side clips, hang wire, pencil rods and tie wire.
Load table
Allowable spans and load capacity by profile, gauge and stud spacing, in metric and imperial, for design and structural review. Fill in the form and our team emails you the current version.
PDF / Engineering
Load and span information is supplied per product and gauge, because capacity depends on the profile, the thickness and the wall height.
"*" indicates required fields
Technical Support
Tell us the product family and what you are trying to confirm. If it is a project-specific question, attach the drawing or specification and our team will review it.
Our team confirms product dimensions, gauges and manufacturing detail. Structural design and code compliance stay with your engineer of record.